№3(8) vol 2, september

The online scientific and methodological journal


Registered in Roskomnadzor Эл ФС 77-57811 № 180414, ISSN 2313-5026

by September 2015 the University is comprised of:

MIREA, MGUPI, VNIITE, R.I. ITiAP, IPK of Ministry of education and science of Russia

2015 № 3 (8) ( September 2015, Issue 8 )

Vol 2

Download one file 32


(Section is prepared by Kondratenko V.S., Head of the Institute of high technologies of MIREA)


Kondratenko V.S.,
Naumov A.S.

Development and implementation of technology of the laser controlled thermocracking in the international market 10

Abstract. This report describes the necessity of application of the equipment for integration of low-speed interfaces in a modern network of high-speed data transfer. The application of the multiplexer ENE-OTN is described for this task. The work is devoted to development of highly effective technologies of processing of a wide class of fragile not metal materials on the basis of a method laser controlled thermocracking (LCT), received recently wide circulation and recognition all over the world. Some examples of effective application of a method ЛУТ in Russia and are given abroad at processing materials in mechanical engineering, instrument making, microelectronics and optoelectronics.
Keywords: Laser controlled thermocracking; Glass; Sapphire.



Kondratenko V.S.,
Sakunenko Y.I.,
Burlyay D.A.

Transenorgoplastic and their innovation capacity 12

Annotation. The work is dedicated to the development and application of a new class of materials - thermally conductive and electrically conductive polymer composites. The advantages of the use of thermally conductive polymers at the front cooling power LED clusters compared to conventional aluminum radiators. An example of the successful use of a conductive polymer in the manufacture of hydrosensory cable.
Keywords: Polymer Composites, Light-emitting diodes (LED), Hydrosensory cable.



Kondratenko V.S.,
Isai I.A.

Laser technology for manufacturing in devices 12

Abstract. The workis dedicated tothe development ofmanufacturing technologygridsandscalesfor optical instrumentsmanagedby laserthermal cleavage(LCT) with CO2-laser and by scribingwith UV-laser.
Keywords: OpticalGrids and Scales,Laser Controlled Thermocracking (LCT), UV-Laser, CO2-Laser, Glass BK-110.



Albagachiev A.U.,
Titov A.A.

Measuring of bending tool using optical fibers 4

Abstract. Some questions of measurement of a bend of a cutter with use of two optical fibers, a radiator, photodetector, the analog-digital converter and microprocessor are considered. Device parameters are estimated.
Keywords: cutter; bending the optical fiber; a photodetector; an emitter; analog-digital converter; microprocessor.



Albagachiev Y. A.,
Mahmudov M. A.

Simulation setting when cutting and friction 6

Abstract. Three phase setting. Offered a simple formula for the calculation of the surface energy and fracture energy of the film, critical temperature, force shvatyvanija. Set indicators shvatyvanija.
Keywords: plastic deformation, energy, film, power, temperature, setting



Khrushchov M.M.,
Marchenko E.A.,
Levin I.S.,

Tarelkin Yu.A.

Diamond-like carbon nanocomposite coatings obtained dy plasma- assisted vapor deposition in vacuum – tribology and structure 7

Abstract. Structure, chemical and phase composition, and tribological behavior of DLC vacuum-deposited coatings have been studied. PACVD a-C:H:Si and a-C:H:Si:Mо coatings deposited using silicon-organic precursors and a-C:H:Cr coatings deposited by reactive magnetron sputtering have been studied. Friction tests with silicon nitride as counterpart have demonstrated that a-C:H:Si and a-C:H:Si:Mо have low COF and friction fatigue durability for contact pressures exceeding 290 MPa, and that their tribological parameters might be improved (if using say model lubricants). The structure and properties of chromium doped DLC coatings have been shown to depend strongly on reactive gas atmosphere composition. These coatings have demonstrated high mechanical and tribological characteristics and might be a promising material for work at high contact pressures.
Keywords: DLC coatings, amorphous carbon, PAPVD, PACVD, reactive magnetron sputtering, alloying, nanocomposite structure, phase composition, tribological properties



Zhuravlev V.A.,
Labuzova L.P.,
Stepanova I.V.

About “Flipped learning” implementation in high school education programs 6

Abstract. This article generalizes the experience of the chair VT-4 in development and implementation of modern computerized educational programs. The best example of this approach is technology called “flipped learning”. This method bases on complete set of video lectures and training programs for each subject. Besides, for its successful use some changes in the organization of educational process should be made.
Keywords: modern educational program, professional learning, video lectures, computer training programs, flipped learning



Kadiev A.R.,
Kadiev M.A.,
Mikhailov B.M.

Analysis of the efficiency wireless sensor netwoks with dynamic structure 5

Abstract. This article discusses the construction of wireless sensor networks (WSN). The great attention is paid to the WSN with varying topology - dynamic networks. It gives a quantitative determination of the dynamic WSN and is defined by its dependence on the topology used, with formulating the main task of improving the efficiency of the network elements.
Keywords: wireless sensor network, topology, efficiency, dynamic wireless sensor network.



Nurmatova E.V.,
Shablovsky A.S.

The development of cross-platform applications semistructured data 10

Abstract. The paper provides a description of the implemented approach to developing a web application, an administrative database of a documentary type. The analysis of similar software solutions. In the result, we proposed a graphical interface for client-server application architecture.
Keywords: data warehouse, document-oriented format, applications, web-interface.



Khalabiya R.F.,
Khalabiya M.L.

Rank distribution nodes of the dynamic distributed database 5

Annotation. Introduction rank distribution account of their active and dynamic host access distributed databases ( DRBD ) to ensure the efficient processing of requests.
Keywords: dynamic database , distributed database , rank , rank distribution nodes.



Raevskiy G.P.,
Khlintzev N.A.

Quad port power splitter on the dielectric waveguides for apparatus EHF-therapy 5

Abstract. Developed design 4-channel in-phase power divider based on a flexible dielectric waveguides for use in the devices (apparatuses) of EHF therapy. The work is related to the technical field of millimeter waves, used to treat and prevent a wide range of diseases - EHF therapy. One of the areas of EHF-therapy is associated with exposure to several biologically active points on the patient's body in accordance with the principles of ancient Chinese medicine. The results of the development and structure optimization of multi-channel contact of the radiator on a flexible dielectric waveguides produced phones for EHF-therapy are presented.
Keywords. EHF-therapy, 4-channel in-phase power divider, the dielectric waveguide



Sakharov Y.S.,
Kolukov V.V.

Modern approaches for adaptive intelligent design electronic means 5

Abstract. Learn how to create intelligent CAD (ISAPR) electronic means (EM) on the basis of the systematic integration of knowledge of experienced developers and formalized knowledge representation of the domain. The approach and its implementation in the form of prototypes of specialized expert systems (SES) to solve some problems of design EM in ISAPR.
Keywords: Intelligent CAD; knowledge of design; domain modeling design of electronic means; expert systems.



Zuev V.V.,
Shmeleva A.G.,
Kalenyuk I.V.,
Rumyantsev R.A.

Software systems for analysis of irreversible phenomenon in structures and constructions under dynamic impacts 9

Abstract. In this paper were shown capabilities of software systems developed by authors for analysis and prediction of stress-strain state and destruction of structures and constructions under dynamic impacts. Close attention was paid to studying of behavior of protective barriers under impact influences and system of "foundation-building" under seismic loads.
Keywords: continuum mechanics; dynamic load; elastic-plastic deformations; hardening-softening; irreversible volume deformation; dilatation.



Kogan D.I.,
Fedosenko Yu.S.

Single-processor servicing for stream of packets: models and synthesis of optimal strategy 18

Abstract. In the paper the motion of protons near atomic nuclei is studied within the framework of a nonlinear generalization of Yukawa’s theory in which the well-known phenomenon of nuclear mass defect is taken into account. Their trajectories are described by a nonlinear differential equation of the second order with respect to the radial coordinate as a function of the polar angle of a proton. Numerical investigations of this equation are carried out for different initial conditions and values of its parameters.
Keywords: nuclear forces, Yukawa’s theory, protons, nonlinear dynamic equations.



Rabinowitch A.S.,
Tyapko A.A.

On the motion of protons in the nonlinear fields of atomic nuclei 5

Abstract. In article approach to creation of new technologies on the basis of basic theoretical provisions new, called "pulse" is stated, theories of cutting and are given technical and economic indicators of the solution of technological tasks. It is shown that the level of the decision has huge practical interest for any branches of production.
Keywords: pulse theory of cutting; efficiency; accuracy; roughness; drilling; boring; milling.



Komarov V.А.,
Pleshakov V.V.

Innovative technologies on the basis of the pulse theory of cutting 6

Abstract. In article the fuel balance of cars in indicator indicators is considered. Components of balance are considered and ways of increase of fuel profitability of trucks are offered.
Keywords: car; fuel profitability; high-speed properties; software package.



Moskovkin V. V.,
Egorushkin E. A.,
Shkel A. S.,
Gurov M. N.

Increases of fuel profitability of trucks 6

Abstract. Section is devoted to the results of the approbation of the fiber optic telemetry complex for complex monitoring of the state of coking chambers of delayed coking unit of JSC "Gazpromneft-Omsk Refinery" as a subsystem of a stationary monitoring system static equipment KOMPAKS AE - designed Ltd. "Dynamics". Specifically, the application fields for monitoring the temperature and gradient of the reactor walls, as well as for monitoring the linear extension of the reactor.
Keywords: The fiber optic sensor, interrogator, deformation, temperature, monitoring



Simonov M.A.,
Kondratenko V.S.

Applications of fiber-optic telemetric complex for monitoring the coking chambers of delayed coking unit of JSC "Gazpromneft-Omsk refinery" 5

Abstract. Section is devoted to the results of the approbation of the fiber optic telemetry complex for complex monitoring of the state of coking chambers of delayed coking unit of JSC "Gazpromneft-Omsk Refinery" as a subsystem of a stationary monitoring system static equipment KOMPAKS AE - designed Ltd. "Dynamics". Specifically, the application fields for monitoring the temperature and gradient of the reactor walls, as well as for monitoring the linear extension of the reactor.
Keywords: The fiber optic sensor, interrogator, deformation, temperature, monitoring



TECHNOLOGIES (Curator of section Solovyov I.V., Vice-rector of MIREA)


Sidorin A.V.,
Sidorin V.V.,
Pokrovskaya M.V.

Modeling innovation at the design stage and development of radioelectronic means 6

Abstract. The article presents an approach to the management of innovation process in the construction of radio-electronic means, based on the idea of wave-shaped nature of the emergence and spread of innovation. The initiation and the spread of the innovation wave is simulated fading fluctuations and describes a harmonic function. A mathematical model of the innovation process to evaluate the effectiveness of innovative activity in the design and development of radio-electronic means. Constraints are formulated submitted model because of the adopted during the development of simplifications and assumptions, and also and the ways to overcome them.
Keywords: radioelectronic means, innovation, innovative wave, a mathematical model of the spread of innovations.



Sidorin A.V.,
Sidorin V.V.

Status and perspectives of quality management’s development in education 5

Abstract: In this paper, the well-known "independent" methods of quality assurance of education are considered. Carried out a comparative analysis, assessed the prospects for their development and application possibilities. The results of comparative analysis and assessment of the prospects of development of the educational institution will allow choosing the most appropriate one to meet the challenges of quality assurance in the specific context of their activities.
Keywords: quality of education, quality management system certification, public and professional accreditation, standard model.



Titov A.A., Bakharev M.M.,
Emelyev K.S.,
Ponamarenko A.A.

Measurement of a specific charge of grains of sand 5

Abstract. The installation for definition of specific charges of grains of sand containing the block of a charge of grains of sand, the block of a deviation of the loaded grains of sand, optical system for obtaining the image of grains of sand is offered. Results of experiment are given. The assessment of range of measurement of a specific charge of grains of sand is given.
Keywords: a specific charge of a grain of sand, the block of a charge of grains of sand, the block of a deviation of the loaded grains of sand, optical system for obtaining the image of grains of sand.



Astapova I.S.,
Smirnova N.D.,
Bychkovsky Y.S.,
Kozlov K.V.,
Kondushin I.S.,
Smotrakov S.A.,
Petuchov V.Y.

The analysis of the concepts of building blocks of control and power for large-scale photodetectors mode time delay and accumulation 5

Abstract. In this paper three types of FPA controlling systems are showed. First two types uses FPGA as central controlling element. The second and the third uses computer as central controlling element. The third method uses the advantages of the first and the second. Electrical schemes of some parts of the equipment are showed.
Keywords: TDI; FPA; FPGA; controlling system.



Bugrov Y.N.,
Lizogub V.A.

The analysis and selection of elements of the main drive turn the actuator of a large mass with a given accuracy 4

Abstract. Offers modern methods of analysis and choosing of elements are widely adjustable valve actuator on the example of the main drive mechanism of dial rotation of the transport complex in order to increase efficiency and accuracy of the positioning by optimizing the speed control dynamics and turn-based controller and computer remote control.
Keywords: mechanisms of the tumbling; translation arrowshaped; supply and tap of the beem with positioning; accuracy to orientation; computer remote control; system CPU.



Bugrov Y.N.,
Lizogub V.A.

Choice and structure - functional analysis of the crossbar drive of the thumb table in CNC equipment 3

Abstract. Offers a modern selection methods and structural – functional analysis of stepper drive for example drive a rotary table or rotary brush equipment (machines and robots) CNC, with the aim of increasing its efficiency and accuracy, by the combined speed control and dynamics of rotation with the electronic division, step, when reaching the position of maximum throw and speed of the transition to the minimum step in the area of positioning.
Keywords: mechanisms of a rotary table or rotary brush, stepper drive, electronic division step, the current stabilization phase, a combined hardware and the controller controls the stepper motor.



Stepanov D.Y.

Analysis, design and development of enterprise resource planning systems: theory and practice 8

Abstract: theoretical approaches to analysis, design, development, test and cutover of ERP-systems were considered. Practical methods of ERP-system realization were analyzed, including usage of knowledge base to find out business requirements; low level modelling techniques based on responsibility to project processes; basic development concepts to compile programs; all testing approaches to test software and cutover strategies to go-live.
Keywords: enterprise resource planning systems, ERP, information systems, analysis, blueprint, development, test, cutover.



Ruzavin E.N.,
Lomovtsev A.A.

Pricing issues in the defence industry 5

Abstract. Pricing is an important component of the economy. Centralized pricing that existed in the USSR was made ineffective. The new pricing system formed but has many problems, the description of which is the subject of this article.
Keywords: pricing issues, enterprises of the military-industrial complex, the cost.



Volosenkov V.O.,
Andreeva O.N.

Analysis of methods of ensuring information security of web applications 5

Abstract. The article discusses the most common vulnerability for users of web applications. For each vulnerability provides methods of ensuring information security of web applications.
Keywords: model of information security, distributed computing system, the criterion of security, information security system.



Lomovtsev A.A.,
Ruzavin E.N.

Evaluating the effectiveness of the planning process, in-process with the implementation of ERP systems 5

Abstract. To ensure the competitiveness of the enterprises of the military-industrial complex requires a unified information system that ensures the effective implementation of administrative tasks, productive and comfortable work of each employee, supports the achievement of business - purposes and allows the flexibility to respond to external and internal changes in the enterprise. This solution can be called modern ERP - system, which reflect the advanced management concepts and methodologies, the latest achievements in the field of information technology.
Keywords: transaction, enterprise resource planning, enterprise performance management.



Maksimov A.V.

Program monitors for complex debugging of special real-time systems 3

Abstract. Based on the analysis of modern means of complex monitoring and the active debugging of the system software in the article are extended the guidelines for its developing and using for special real-time systems.
Keywords: debugging, real-time operating systems, monitoring.



Grodzensky Y.S.,
Zakharov A.F.,
Volodina M.V.

Suppliers selection based on Deming and total quality management principles 3

Abstract. The matter of suppliers selection and mutually beneficial relationships building are considered according to Deming and Total Quality Management principles. The basic principles of long-term relationships building are described.
Keywords: suppliers selection, mutually beneficial relationships, forth Deming principle, eighth Total Quality Management principle.



Grodzenskiy S.Y.,
Kirov A.V.

Formation features of the special products quality on the product lifecycle stages 4

Abstract. Features of lifecycle stages are considered according to international standards in the context of the special products. The role of each stage is presented for the quality products formation.
Keywords: special products, lifecycle, lifecycle stages, product quality.



Pulkin I.Z.

Spatial location of production centers under competition 7

Annotation. Describes a model problem of Hotelling on the placement of production centres in the presence of the competition. It is shown that various kinds of functions elasticity of demand in relation to the distance an lead to concentration of production, and to its dissemination.
Keywords. The task of Hotelling; the function of the elasticity of demand; spatial competition.



Kharlamov G.U.,
Eremin E.O.,
Krakhmalniy I.O.

Space objects detection algorithm in survey optoelectronic systems 7

Abstract. Discussed approaches to solving problems of natural and artificial origin space objects detection on the basis of observations with wide-angle optoelectronic systems on the ground or on spacecraft’s board.
Keywords: space objects, image segmentation, image identification



Puturidze Z.S.

Technological complex of elaboration of automated system of organizational control 4

Annotation: The technology of production of the automated systems of documentary maintenance activity (ASDMA) and the automated systems of organizational control (ASOC). The technology contains the methodology, the tool development environment and elaboration ASOC. In the context of technology the original language of description subject area DMA has been elaborated. The obtained findings from the point view of the degree of automation tasks are limiting. Created by technology ASOCs are invariant concerning the field of organization’s activity.
Keywords: automated system of organizational control, system of documentary maintenance activity, documents circulation, engineering, work station, development environment